60 - Ladders & Scaffolding - Tool Rental Depot Store

Walkboard/Plant - Aluminum Walkboard/Plant - Aluminum

This all-aluminum walkboard is 28' long and 24" wide. Often used to span between scaffold towers. This all-aluminum walkboard is 28'...

More

Mid Post - Scaffold Guard Rail Mid Post - Scaffold Guard Rail

Mid posts are used when scaffolding is erected with 7' lengths end-to-end. The posts fit over each frame's stack pin and enable the 7' guard rails to attach and span to each end. Mid posts are used when scaffolding...

More

Side Bracket - 20" Side Bracket - 20"

Side brackets can be hung on the side of frames to hold one walkboard. This allows tower to be erected two feet from the wall to eliminate interference with work. Not recommended for rolling towers or narrow scaffolding. Side brackets can be hung on the side...

More

Guard Rail End Panel - 28" Guard Rail End Panel - 28"

This end panel stacks on the 28" wide frames. The standard 7' rails connect to these to create 3 or 4-sided rail protection. This end panel stacks on the 28" wide...

More

Guard Rail Side Panel - 7' Guard Rail Side Panel - 7'

This rail assembly attached to either the guard rail end panels or to mid posts. Provides rail protection on the 7' long dimension of the section(s). This rail assembly attached to either...

More

Scaffold Grouzer Bar ( Gooser or Squaring Brace) Scaffold Grouzer Bar ( Gooser or Squaring...

This stability bar is clamped diagonally at the base of the tower just above the casters. Adds rigidity for tall towers. This stability bar is clamped...

More

Scaffold Outrigger - 30" Scaffold Outrigger - 30"

Outriggers clamp on to the first section of scaffolding and increase the 'footprint' of the section. This distributes weight over a broader area and adds 4 contact points to the assembly. State laws require outriggers when the standing height exceeds certain distances. Ask for details. Outriggers clamp on to the first...

More

Guard Rail End Panel - 5' Guard Rail End Panel - 5'

This safety guard rail panel fits over all 5' wide scaffold frames. Includes provision for toe boards and are used in conjunction with 7' guard rail assemblies. This safety guard rail panel fits...

More

Scaffold Screw Jack w/socket Scaffold Screw Jack w/socket

This adjustable screw jack is designed for castor wheels to fit up inside the socket end. This allows for leveling of a rolling tower when used on slowed floors. They can also be used to stack with other screw jacks for more extreme slopes. This adjustable screw jack is...

More

Scaffold Screw Jack w/swivel plate Scaffold Screw Jack w/swivel plate

Screw jacks are used as 'feet' for scaffold frames in order to level the section and any stacked sections. Compensate for up to 18" of height. The plates on these jacks swivel to conform to slopes. Screw jacks are used as 'feet' for...

More

Scaffold Screw Jack w/plate Scaffold Screw Jack w/plate

Screw jacks are used as 'feet' for scaffold frames in order to level the section and any stacked sections. Compensate up to 18" for slopes or uneveness between the four corners. Screw jacks are used as 'feet' for...

More

Scaffold Castor Wheel Scaffold Castor Wheel

Castors are 8" diameter, double locking type. Add castor wheels to section(s) of scaffolding for easy movement on hard surfaces. Safety clips are included with castors which pin the castor in the frames to prevent accidental dropout if rolled over a low spot of floor. Castors are 8" diameter, double...

More

Scaffold Walkboard Scaffold Walkboard

Walkboards are designed to grip on the frames built to the standard 7' long dimension. They measure 19.5" wide. On 5' wide sections, 3 boards are required to completely plant the top desk if desired. Our rental boards are all aluminum with traction surface. Walkboards are designed to grip on...

More

Scaffold Brace Scaffold Brace

These cross braces are used to connect scaffold frames and form a 'section'. Our braces are designed to be used with frames having connecting points that are 27 2/4" apart in order to have a 7' section length. These cross braces are used to...

More

Scaffold Frame - Walk-Thru 5'Wx6'6"T Scaffold Frame - Walk-Thru 5'Wx6'6"T

This frame is designed with a large space between corners to allow walking through from end to end. Often used as first level to straddle obstacles. This frame is designed with a large...

More

Scaffold Frame - Narrow 28"Wx6'T Scaffold Frame - Narrow 28"Wx6'T

This frame is narrow and not recommended for stacking without outriggers or if used in narrow area where tipping is not a concern. Walkboards adjust every foot. This frame is narrow and not...

More

Scaffold Frame (buck) 5'Wx3'T Scaffold Frame (buck) 5'Wx3'T

this frame is often referred to as half a buck. Use one side of the frame as ladder and other for walkboard height adjustments. All out frames are stackable so achieving the desired height is possible. Frames have 9" stack pins with 1" collars. this frame is often referred to as...

More